HOME › Forums › BIM-BAM-BOUM › BOUM distortion knob weighting
Tagged: Boum, distortion
- This topic has 2 replies, 2 voices, and was last updated 6 years, 3 months ago by
Oto Machines.
-
AuthorPosts
-
1 July 2018 at 8 h 03 min #1445
Anonymous
Inactiveca va OTO?
i just got my BOUM and notice that the distortion dials are almost somewhat binary.. having the knob at less than 9 o’clock seems to already dial in max distortion for me . I really do have a hard time setting subtle Distorsion in any of the 4 modes……somewhat related – are you able to explain the connection/relation between compression and distortion? I am getting some unexpected results
many thanks!
Jan1 July 2018 at 9 h 02 min #1448Inactive..to actually phrase it into a question… am I doing something wrong? (too hot input maybe?). or could my unit be faulty? really struggling to getting anything musical when using the distortion. would love to hear your take at it. merci!
1 July 2018 at 10 h 24 min #1449Oto Machines
KeymasterBonjour !
How many LEDs you see on the VU meter when you send signal to your BOUM ? 5 to 6 should be a good start
Did you set the IN GAIN parameter to position 2 or more ?
With VU meter at 5-6 LEDs (near 0dB), IN GAIN at 0dB, DISTO in BOOST mode, COMPRESSOR at min position, you should get a clean sound when the DRIVE pot is at its min position. Raising DRIVE pot will add a soft distortion before mid position, then a more drastic one.
If it’s not the case, maybe your BOUM is faulty (contact us via support email).
If you look at the diagram (p. 6 of the User Manual), you can see that the compressor is placed before the distortion generator. After the compressor, you have an amplifier set by the DRIVE pot, followed by the distortion generator (4 modes).
If you want a “clean” compressor sound, select IN GAIN 0 dB, BOOST mode, fast or slow attack, mid to long release, DRIVE under 9 o’clock. -
AuthorPosts
- You must be logged in to reply to this topic.